Views:
36,366
Votes: 16
✅ Solution
Tags:
usb
thunderbolt
Link:
🔍 See Original Answer on Ask Ubuntu ⧉ 🔗
URL:
https://askubuntu.com/q/985074
Title:
How to check (via software) if my usb 3.1gen2 Type-C port supports Thunderbolt3?
ID:
/2017/12/10/How-to-check-_via-software_-if-my-usb-3.1gen2-Type-C-port-supports-Thunderbolt3_
Created:
December 10, 2017
Edited: June 12, 2020
Upload:
April 8, 2024
Layout: post
TOC:
true
Navigation: true
Copy to clipboard: false
Thunderbolt 3
My system has Thunderbolt 3, USB 3.1 Gen 2 Type-C jack. I use it to drive a second HDMI TV through a DisplayPort to HDMI adapter.
Table of Contents
- Thunderbolt 3
- lsusb -t
- Bottom of
sudo lshw | grep -A10 -i usb - Summary
- Look at PCIe for more information
lsusb -t
$ lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 4: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 1, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 4, If 0, Class=Printer, Driver=usblp, 480M
|__ Port 4: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 4: Dev 10, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 8, If 0, Class=Vendor Specific Class, Driver=usbfs, 480M
|__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 7, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 7, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 9: Dev 9, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 9: Dev 9, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 9: Dev 9, If 2, Class=Human Interface Device, Driver=usbhid, 12M
Notice the speed of 10000M which doesn’t appear on your display.
Bottom of sudo lshw | grep -A10 -i usb
*-usb
description: USB controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:39:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:123 memory:d9f00000-d9f0ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 4.14.4-041404-generic xhci-hcd
physical id: 0
bus info: usb@3
logical name: usb3
version: 4.14
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 4.14.4-041404-generic xhci-hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 4.14
capabilities: usb-3.10
configuration: driver=hub slots=2 speed=10000Mbit/s
Notice the last line speed=10000Mbit/s.
Summary
It appears you do not have Thunderbolt 3 nor USB 3.1 Generation 2. You have USB 3.1 Type C Generation 1.0 which is 5 Gbps (480 MB/s) the same speed as USB 3.0.
The best way to find out is to look for the “thunderbolt” picture next to the USB Type-C jack on your computer. However even then it might only be two PCIe lanes and not four (according to some websites I read tonight).
Look at PCIe for more information
PCIe tree
$ lspci -tv
-[0000:00]-+-00.0 Intel Corporation Sky Lake Host Bridge/DRAM Registers
+-01.0-[01]--+-00.0 NVIDIA Corporation GM204M [GeForce GTX 970M]
| \-00.1 NVIDIA Corporation GM204 High Definition Audio Controller
+-02.0 Intel Corporation Skylake Integrated Graphics
+-04.0 Intel Corporation Skylake Processor Thermal Subsystem
+-14.0 Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller
+-14.2 Intel Corporation Sunrise Point-H Thermal subsystem
+-16.0 Intel Corporation Sunrise Point-H CSME HECI #1
+-17.0 Intel Corporation Sunrise Point-H SATA Controller [AHCI mode]
+-1c.0-[02-3a]----00.0-[03-3a]--+-00.0-[04]--
| +-01.0-[05-38]--
| \-02.0-[39]----00.0 Intel Corporation DSL6340 USB 3.1 Controller [Alpine Ridge]
+-1c.4-[3b]----00.0 Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller
+-1c.5-[3c]----00.0 Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
+-1c.6-[3d]----00.0 Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
+-1d.0-[3e]----00.0 Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
+-1f.0 Intel Corporation Sunrise Point-H LPC Controller
+-1f.2 Intel Corporation Sunrise Point-H PMC
+-1f.3 Intel Corporation Sunrise Point-H HD Audio
\-1f.4 Intel Corporation Sunrise Point-H SMBus
Looking at the details below we see nVidia GPU can take a maximum of 16 PCIe lanes at Gen 3.0 speeds but, is currently using 8 lanes. NVMe M.2 Samsung SSD is taking 4 PCIe lanes at Gen 3.0 speeds. Others devices at taking 1 PCIe lane at Gen 3.0 speeds or less.
Device 1c.0 -02 looks like it may serve the Thunderbolt3 taking 4 PCIe lanes at Gen 3.0 speeds. The description above reads “Alpine Ridge”. However when you run sudo lspci -tv the description changes:
+-1c.0-[02-3a]----00.0-[03-3a]--+-00.0-[04]--
| +-01.0-[05-38]--
| \-02.0-[39]----00.0 Intel Corporation Device 15b5
When you google 15b5 it confirms it’s the Intel Thunderbolt 3!
There is other interesting information below such as nVidia power limit of 75 Watts. Ethernet and WiFi power limit of 10 watts but yet SSD has a limit of 25 watts which seems high. The Thunderbolt3 power limit is 25 watts which makes sense for charging devices.
The report below had to be truncated heavily because it won’t fit into Ask Ubuntu 30KB message maximum size. I left in the relevant details which I hope complements the tree printout above.
Partial contents of sudo lspci -vv (73 kb initially):
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
Subsystem: Dell Skylake Host Bridge/DRAM Registers
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07) (prog-if 00 [Normal decode])
(...SNIP...)
Capabilities: [88] Subsystem: Dell Skylake PCIe Controller (x16)
Capabilities: [80] Power Management version 3
(...SNIP...)
LnkCap: Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us
(...SNIP...)
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
(...SNIP...)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Dell Skylake Integrated Graphics
(...SNIP...)
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
Subsystem: Dell Skylake Processor Thermal Subsystem
(...SNIP...)
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-H USB 3.0 xHCI Controller
(...SNIP...)
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
Subsystem: Dell Sunrise Point-H Thermal subsystem
(...SNIP...)
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
Subsystem: Dell Sunrise Point-H CSME HECI
(...SNIP...)
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Sunrise Point-H SATA Controller [AHCI mode]
(...SNIP...)
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=3a, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 8GT/s, Width x4, ASPM not supported, Exit Latency L0s unlimited, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Sunrise Point-H PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [220 v1] #19
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])
(...SNIP...)
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #8, PowerLimit 10.000W; Interlock- NoCompl+
(...SNIP...)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) (prog-if 00 [Normal decode])
(...SNIP...)
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #9, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
(...SNIP...)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #7 (rev f1) (prog-if 00 [Normal decode])
(...SNIP...)
LnkCap: Port #7, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #10, PowerLimit 10.000W; Interlock- NoCompl+
(...SNIP...)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1) (prog-if 00 [Normal decode])
(...SNIP...)
LnkCap: Port #9, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <16us
(...SNIP...)
Slot #12, PowerLimit 25.000W; Interlock- NoCompl+
(...SNIP...)
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
(...SNIP...)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
Subsystem: Dell Sunrise Point-H LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
Subsystem: Dell Sunrise Point-H PMC
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dd12c000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
Subsystem: Dell Sunrise Point-H HD Audio
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 128
Region 0: Memory at dd128000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dd100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00318 Data: 0000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
Subsystem: Dell Sunrise Point-H SMBus
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at dd132000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GM204M [GeForce GTX 970M] (rev a1)
Subsystem: Dell GM204M [GeForce GTX 970M]
(...SNIP...)
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
(...SNIP...)
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_384_drm, nvidia_384
01:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
(...SNIP....)
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 PCI bridge: Intel Corporation Device 1576 (prog-if 00 [Normal decode])
(...SNIP....)
03:01.0 PCI bridge: Intel Corporation Device 1576 (prog-if 00 [Normal
(...SNIP....)
03:02.0 PCI bridge: Intel Corporation Device 1576 (prog-if 00 [Normal
(...SNIP....)
39:00.0 USB controller: Intel Corporation Device 15b5 (prog-if 30
(...SNIP....)
3b:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
Subsystem: Device 0707:2400
(...SNIP...)
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
(...SNIP...)
Kernel driver in use: alx
Kernel modules: alx
3c:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network Adapter
(...SNIP....)
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
3d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
(...SNIP....)
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
3e:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a804 (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd Device a801
(...SNIP...)
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
(...SNIP...)
Kernel driver in use: nvme
Kernel modules: nvme
I’ll try to study this a little more and update it later.